Questions and Answers
- Two beeps a delay then fail light flashes with beeps
- Machine gives one beep but does not stitch when start/stop button is hit.
- Machine does not stitch in one direction
- Machine will not turn on.
- Fail light flashes and beeps then laser light flashes.
- My constant speed stitches are not fast enough
I/S Turbo
Nolting
APQS
GAMMILL
Adjustment Procedures
- I/S Turbo CL 2.41 adjustment procedure
- I/S TURBO adjustment procedure for all models, including Nolting PRO, with REV1.X software
- I/S-2KN adjustment procedure for NOLTING machines with REV1.x software
- I/S-2K adjustment procedure for APQS machines with REV2.x software
- I/S-2K adjustment procedure for A-1 machines with REV2.x software
- I/S-2K adjustment procedure for GAMMILL machines with REV2.x software
Upgrade Instructions
- Control Panel Replacement
- I/S Switch Replacement Procedure
- Gammill Machine Controller Board Replacement Procedure
- TURBO-CL Upgrade Procedure
- APQS Program Chip Replacement
- APQS Machine Surge Protector Installation