APQS Machine Surge Protector Installation

Before starting the installation, make sure that the power cord is unplugged.

motor-connector1.jpgRemove the screws holding the top plastic cover and flip the cover to the left.

Unplug the motor connector (BLACK/RED wires), and put the protective cover on it, as the picture shows.






motor-connector2.jpgPlug the motor connector in the header of the surge protector module, and insert the module's connector in the motor header, as the picture shows.

Secure the surge protector on the top by the enclosed double-sided tape.

Replace the top cover.

Have more questions? Submit a request


Article is closed for comments.
Powered by Zendesk