The switch wires are different colors than described.

On certain machines, we re-use existing machine wires for the switches. Your switch wires that connect from the switch to the back of your control panel may be different colors than in the Intellistitch documentation seen here:

Control switches to screw terminal:

- cable from the BLACK start/stop switch to "START" (RED) and top "GND"

  (BLACK)

- cable marked with a RED tape from the RED single stitch switch to "SS"

(RED) and bottom "GND" (BLACK)

When reconnecting wires to the control panel, note where they were originally placed and reconnect in the same way.

Have more questions? Submit a request

0 Comments

Article is closed for comments.
Powered by Zendesk