Machine started a continuous beeping with the laser light flashing.

This can happen if one of the single stitch buttons is shorted. It takes the I/S to setup mode (laser light blinking), but does not continue until the short is removed. You may not see the RUN light flashing, pointing to the shorted switch, because it is the single stitch switch on the other side of the machine. Replacement switches can be purchased from Radio Shack or www.quilttech.com. For instructions on replacement, go to :

https://intellistitch.zendesk.com/entries/22665348-i-s-switch-replacement-procedure

Have more questions? Submit a request

0 Comments

Article is closed for comments.
Powered by Zendesk